- Brand : NETGEAR
- Product name : GSM7328FS
- Product code : GSM7328FS-100EUS
- Category : Network Switches
- Data-sheet quality : created/standardized by Icecat
- Product views : 103419
- Info modified on : 21 Oct 2022 10:14:32
-
Long product name NETGEAR GSM7328FS Managed L3 Blue
:
GSM7328FS - 1 Gbit/s, 8000 entries
-
NETGEAR GSM7328FS Managed L3 Blue
:
Flexible, Stackable, High Speed Switching!
NETGEAR’s low-cost, stackable, Gigabit Ethernet switches deliver maximum throughput and flexibility where you need it — to high-speed, high-density workgroups at the edge of the network, in the backbone of growing networks or for bandwidth-thirsty file and application servers. The ProSafe GSM7328S and GSM7352S fully-managed switches deliver 24 and 48 ports of auto-sensing 10/100/1000 Mbps interfaces for high-density copper connectivity. Four (GSM7328S) or eight (GSM7352S) hot-swappable Small Form-factor Pluggable (SFP) gigabit interfaces provide optional fiber connectivity for longer reach Gigabit Ethernet requirements. For high-density fiber installations, the GSM7328FS delivers 24 hot-swappable SFP Gigabit interfaces for fiber connectivity and 4 combo ports of auto-sensing 10/100/1000 Mbps interfaces for copper connectivity. All switches have four high-speed, module bays offering modular expansion for 10 Gigabit Ethernet or 24 Gigabit Stacking connectivity. The non-blocking design of the switches delivers simultaneous, full wire-speed, low-latency throughput to all ports. A full suite of Layer 3 switching functionality ensures reliable routing between VLANs and network segmentation where and when you need it, at no additional cost. By configuring the switches into a stack of up to 8 units across a 48 Gbps bi-directional ring, a high-density, single IP-addressable switch can be built. Robust security features include IEEE 802.1x port-based authentication and access control lists, ensuring that only authorized users can access your network. Secure management of the switches is available through Secure Sockets Layer (SSLv3) for the Web GUI and Secured Shell (SSH) for command-line sessions or with SNMP v3 for network management software. For workgroup deployments in cost-sensitive organizations that require Layer 3 switching, additional Gigabit capacity, high-value price point, flexibility of stacking, and reduced maintenance requirements, NETGEAR’s ProSafe Gigabit Layer 3 Stackable switches deliver the ideal access-edge solution. With their high-value price point, flexible design, and reduced maintenance requirements, NETGEAR’s ProSafe Gigabit Layer 3 Stackable switch solutions yield a high return on investment, and are ideal for delivering highly reliable, converged voice, video, and data services over a single network infrastructure.
Powerful
In desktop switching environments, wire-speed performance with full QoS control for all 10/100/1000 interfaces is critical. The 4 high-speed 10G/24G module bays provide unprecedented flexibility, whether you are stacking between switches, attaching bandwidth-thirsty file servers, or aggregating critical data to the core of your network.
Easy to Use
Simplify and reduce IT staff workload and mean time-to-repair with intuitive, GUI-based device configuration, and an industry-standard command-line interface (CLI). The EZ-Config tool simplifies initial configuration steps to streamline the out-of-box set-up. For easy tracking of port usage, use the text-based port description to label how ports are used. Stacking capabilities allow you to build a single-IP manageable device with up to eight switches utilizing ultra-high-speed 48 Gbps across intelligent bi-directional redundant stacking links. -
Short summary description NETGEAR GSM7328FS Managed L3 Blue
:
NETGEAR GSM7328FS, Managed, L3
-
Long summary description NETGEAR GSM7328FS Managed L3 Blue
:
NETGEAR GSM7328FS. Switch type: Managed, Switch layer: L3. Basic switching RJ-45 Ethernet ports quantity: 4. MAC address table: 8000 entries. Networking standards: IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE 802.1x, IEEE...
Management features | |
---|---|
Switch type | Managed |
Switch layer | L3 |
Quality of Service (QoS) support |
Ports & interfaces | |
---|---|
Basic switching RJ-45 Ethernet ports quantity | 4 |
SFP/SFP+ slots quantity | 24 |
SFP module slots quantity | 24 |
Network | |
---|---|
Networking standards | IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE 802.1x, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3ae, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
Copper ethernet cabling technology | 1000BASE-T, 100BASE-TX, 10BASE-T |
Port mirroring | |
Flow control support | |
Link aggregation |
Data transmission | |
---|---|
MAC address table | 8000 entries |
Store-and-forward | |
Maximum data transfer rate | 1 Gbit/s |
Packet buffer memory | 0.334 MB |
Security | |
---|---|
Access Control List (ACL) |
Multicast features | |
---|---|
Multicast support |
Protocols | |
---|---|
Management protocols | IGMP v1, v2, SNMP v1, v2c, v3, SNTP |
Design | |
---|---|
Product colour | Blue |
Certification | CE mark EN55022 Class A EN55024 FCC Part 15 Class A VCCI Class A C-Tick CE mark EN 60950-1 UL/cUL 60950-1 |
Performance | |
---|---|
Internal memory | 256 MB |
Flash memory | 32 MB |
Noise level | 51.7 dB |
Power | |
---|---|
Power consumption (typical) | 78 W |
Power over Ethernet (PoE) | |
---|---|
Power over Ethernet (PoE) |
Operational conditions | |
---|---|
Operating temperature (T-T) | 0 - 50 °C |
Storage temperature (T-T) | -20 - 70 °C |
Operating relative humidity (H-H) | 0 - 90% |
Operating altitude | 0 - 3000 m |
Non-operating altitude | 0 - 3000 m |
Relative humidity | 0 - 95% |
Heat dissipation | 266 BTU/h |
Weight & dimensions | |
---|---|
Weight | 5.4 kg |
Other features | |
---|---|
Latency | 6 us |
Dimensions (WxDxH) | 440 x 385 x 43 mm |
Connectivity technology | Wired |
Authentication method | IEEE 802.1x |
Country | Distributor |
---|---|
|
1 distributor(s) |