- Brand : Samsung
- Product family : Spinpoint P
- Product name : 80GB Serial ATA II HDD
- Product code : HD080HJ-P
- Category : Internal Hard Drives
- Data-sheet quality : created/standardized by Icecat
- Product views : 87800
- Info modified on : 04 Apr 2019 07:34:24
-
Long product name Samsung Spinpoint P 80GB Serial ATA II HDD
:
80GB Serial ATA II HDD, 7200 RPM, 8MB, 8.9ms, RoHSMB
-
Samsung Spinpoint P 80GB Serial ATA II HDD
:
Features:
- Native Serial ATA II (3.0Gbps) with Native Command Queuing (NCQ).
- Fluid Dynamic Bearing Spindle Motor Technology.
- High Speed Dual Digital Signal Processor (DSP) Based Architecture.
- ATA SMART Compliant.
- ATA Security Mode Feature Set.
- ATA Host Protected Area Feature Set.
- ATA Automatic Acoustic Management Feature Set.
- ATA 48-bit Address Feature Set.
- ATA Streaming Feature Set.
- ATA Power Up In Standby Feature Set.
- ATA Device Configuration Overlay Feature Set.
- Permuted RLL/ECC On-The-Fly Error Correction.
- RoHS-compliant.
- NoiseGuard™.
- SilentSeek™.
- Hot-Plug & Hot-Swap capable. -
Short summary description Samsung Spinpoint P 80GB Serial ATA II HDD
:
Samsung Spinpoint P 80GB Serial ATA II HDD, 80 GB, 7200 RPM
-
Long summary description Samsung Spinpoint P 80GB Serial ATA II HDD
:
Samsung Spinpoint P 80GB Serial ATA II HDD. HDD capacity: 80 GB, HDD speed: 7200 RPM
| Features | |
|---|---|
| HDD capacity | 80 GB |
| HDD speed | 7200 RPM |
| Interface | Serial ATA II |
| Storage drive buffer size | 8 MB |
| Full stroke seek time | 18 ms |
| Track to track seek time | 0.8 ms |
| Average seek time | 8.9 ms |
| Average latency | 4.17 ms |
| Bytes per sector | 512 |
| Start/stop cycles | 50000 |
| Mean time between failures (MTBF) | 600000 h |
| Power | |
|---|---|
| Power consumption (typical) | 9 W |
| Power consumption (standby) | 1.5 W |
| Operational conditions | |
|---|---|
| Operating temperature (T-T) | 0 - 60 °C |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating relative humidity (H-H) | 5 - 90% |
| Storage relative humidity (H-H) | 5 - 95% |
| Operating altitude | 0 - 3000 m |
| Non-operating altitude | 0 - 12000 m |
| Operating shock | 63 G |
| Non-operating shock | 350 G |
| Other features | |
|---|---|
| Power requirements | +5V; +12V |
| Acoustic pressure emissions | 2.6 dB |
| Internal | |
| Drive ready time | 7 s |