- Brand : Tripp Lite
- Product name : Gigabit Multimode Fiber to Ethernet Media Converter, POE+ - 10/100/1000 SC, 850 nm, 550 m (1804 ft.)
- Product code : N785-P01-SC-MM1
- GTIN (EAN/UPC) : 0037332236913
- Category : Network Media Converters
- Data-sheet quality : created/standardized by Icecat
- Product views : 73500
- Info modified on : 10 Aug 2024 11:22:51
- Product Brochure/Datasheet (0.2 MB)
-
Long product name Tripp Lite Gigabit Multimode Fiber to Ethernet Media Converter, POE+ - 10/100/1000 SC, 850 nm, 550 m (1804 ft.)
:
Gigabit Multimode Fiber to Ethernet Media Converter, POE+ - 10/100/1000 SC, 850 nm, 550 m (1804 ft.)
-
Tripp Lite Gigabit Multimode Fiber to Ethernet Media Converter, POE+ - 10/100/1000 SC, 850 nm, 550 m (1804 ft.)
:
Extends Power and Data to a PoE+ Device up to 550 Meters via SC Multimode Fiber Cable
This economical unit converts a multimode fiber optical signal to a copper Ethernet signal that extends both power (48 VDC) and 10/100/1000 Mbps Gigabit Ethernet to a PoE+ (Power over Ethernet) device. Because Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N785-P01-SC-MM1 with multimode fiber cable to reach greater distances. This could include providing both data and power to PoE and PoE+ devices, such as security cameras, VoIP telephones, point-of-sale kiosks and access control devices.
Supports Power over Ethernet to Save You Money and Give You More Installation Choices
PoE saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install PoE devices in areas far away from AC outlets, such as poles or ceilings.
Supports Auto-Sensing of Network Speed and Other Advanced Functions
Monitoring and controlling your network nodes is easy with the N785-P01-SC-MM1’s advanced features, such as automatic network speed sensing, full/half-duplex auto-detection and automatic MDI/MDIZ configuration. Six LEDs indicate the converter’s power, PoE, Ethernet network and fiber link statuses at a glance. Link fault pass through (LFP) monitors both the SC and RJ45 ports to ensure link status remains active.
Works in Tandem with Tripp Lite’s N785-001-SC-MM Media Converter
This media converter connects to the N785-001-SC-MM using multimode fiber optic cabling with SC ends (such as Tripp Lite’s N520-Series, sold separately) to extend an Ethernet network connection up to 550 meters. Use Cat5e/6 cabling (such as Tripp Lite’s N001- or N201-Series cables) to deliver data and power to a 10/100/1000 Mbps PoE device up to 100 meters (328 feet) from the N785-P01-SC-MM1.
Completely Plug-and-Play with No Additional Software Required for Connection
The compact metal converter is easy to install and set up with no software or drivers required. The included power supply connects to a convenient AC outlet with no computer or other signal source needed. -
Short summary description Tripp Lite Gigabit Multimode Fiber to Ethernet Media Converter, POE+ - 10/100/1000 SC, 850 nm, 550 m (1804 ft.)
:
Tripp Lite Gigabit Multimode Fiber to Ethernet Media Converter, POE+ - 10/100/1000 SC, 850 nm, 550 m (1804 ft.), 1000 Mbit/s, Fast Ethernet, Gigabit Ethernet, 10,100,1000 Mbit/s, Full, Half, Cat5, Cat5e, Cat6, Cat6a, Fiber, 550 m
-
Long summary description Tripp Lite Gigabit Multimode Fiber to Ethernet Media Converter, POE+ - 10/100/1000 SC, 850 nm, 550 m (1804 ft.)
:
Tripp Lite Gigabit Multimode Fiber to Ethernet Media Converter, POE+ - 10/100/1000 SC, 850 nm, 550 m (1804 ft.). Maximum data transfer rate: 1000 Mbit/s, Ethernet interface type: Fast Ethernet, Gigabit Ethernet, Ethernet LAN data rates: 10,100,1000 Mbit/s. Maximum transfer distance: 550 m, Wavelength: 850 nm, Fiber mode structure: Multi-mode. Product colour: Black. Fiber optic connector: SC, Connectivity technology: Wired. Input voltage: 100 - 240 V, AC input frequency: 50 - 60 Hz, Input current: 1.5 A
Network | |
---|---|
Maximum data transfer rate | 1000 Mbit/s |
Ethernet interface type | Fast Ethernet, Gigabit Ethernet |
Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
Duplex system | Full, Half |
Cable types supported | Cat5, Cat5e, Cat6, Cat6a, Fiber |
Performance | |
---|---|
Maximum transfer distance | 550 m |
Wavelength | 850 nm |
Fiber mode structure | Multi-mode |
Features | |
---|---|
Internal | |
LED indicators | |
Product colour | Black |
Ports & interfaces | |
---|---|
Connectivity technology | Wired |
Ethernet LAN (RJ-45) ports | 1 |
Fiber ports quantity | 1 |
Fiber optic connector | SC |
DC-in jack |
Power | |
---|---|
Input voltage | 100 - 240 V |
AC input frequency | 50 - 60 Hz |
Input current | 1.5 A |
Output voltage | 48 V |
Output current | 1.25 A |
Power over Ethernet (PoE) | |
External power adapter | |
Power plug type | Type B |
Weight & dimensions | |
---|---|
Weight | 200 g |
Operational conditions | |
---|---|
Operating temperature (T-T) | -20 - 60 °C |
Storage temperature (T-T) | -20 - 70 °C |
Operating relative humidity (H-H) | 5 - 90% |
Storage relative humidity (H-H) | 5 - 90% |
Packaging content | |
---|---|
AC adapter included | |
Manual |
Packaging data | |
---|---|
Package width | 248.9 mm |
Package depth | 214.9 mm |
Package height | 80 mm |
Package weight | 770 g |
Certificates | |
---|---|
Compliance certificates | RoHS |
Logistics data | |
---|---|
Country of origin | China |
Master (outer) case GTIN (EAN/UPC) | 10037332236910 |
Master (outer) case width | 460 mm |
Master (outer) case length | 430 mm |
Master (outer) case height | 270 mm |
Master (outer) case gross weight | 8.12 kg |
Products per master (outer) case | 10 pc(s) |
Country | Distributor |
---|---|
|
1 distributor(s) |