10/100/1000T, 1000 SFP Standalone Bridging Converter

Overview
The AT-GS2002/SP Ethernet Bridging Converters are designed to extend the distance of your network by interconnecting LAN devices that
are physically separated by large distances. These bridging converters have the functionality to connect any managed/unmanaged 10Mbps, 100Mbps, or 1000Mbps (1Gbps) switch or hub using standard 10/100/1000T RJ45 connections and convert the electrical signal to fiber optical
signal via its SFP port.

Extend the Distance of Ethernet
Each AT-GS2002/SP bridging converter features a 10/100/1000T twisted pair port and an SFP port. The twisted pair port has an RJ45 connector and a maximum operating distance of 100 meters (328 feet). These units can operate at half- and full-duplex.

Standalone or Rackmounted
Each small bridging converter is powered by an external power supply unit for use in standalone applications. Where multiple media
converters are used, up to 12 standalone devices can be inserted into a low-cost AT-MCR12 rackmount chassis, allowing all the converters to be powered by a single internal power supply. In critical applications, a second load sharing internal power supply can be
installed into the rackmount chassis.

Hassle Free Support
All Allied Telesyn Ethernet bridging converters have a limited lifetime warranty and free technical support, ensuring trouble-free
installation.

Allied Telesis 10/100/1000T Gigabit Ethernet Bridging Converter, 1000 Mbit/s, 10Base-T, 100Base-TX, 1000Base-T, 1000X, Wired, IEEE 802.3, IEEE 802.3u, EN60950 (TUV), UL60950 (cULus), CE Compliant, EN60825, 6 W

Allied Telesis 10/100/1000T Gigabit Ethernet Bridging Converter. Maximum data transfer rate: 1000 Mbit/s, Cabling technology: 10Base-T, 100Base-TX, 1000Base-T, 1000X. Connectivity technology: Wired. Compliance industry standards: IEEE 802.3, IEEE 802.3u, Safety: EN60950 (TUV), UL60950 (cULus), CE Compliant, EN60825. Power consumption (typical): 6 W. Weight: 270 g